AK4497 DAC processor / kits

AVForums

Help Support AVForums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chrisc

AVForums Grandmaster
*
AV Forums Supporter
Joined
Dec 24, 2008
Messages
15,380
Reaction score
2,507
Location
Plumstead, Cape Town
Source:  http://www.akm.com/akm/en/aboutus/news/20160107AK4497_001/

The first description is about the processor itself.  Next are some kits available from eBay.

The processor costs in the region of R950, the kits are about R1300.  You would also need a power supply and an enclosure

The high-end audio market is being driven by the growing availability of high-resolution sound sources. Aasahi Kasei Microdevices Corporation (AKM) has developed a new 3rd generation flagship premium D/A converter, the VERITA AK4497. This is the new, higher performing solution of the VERITA AK4490 that is adopted by many audio products since it was launched in 2014.
The AK4497 is a new generation premium 32-bit DAC based on AKM?s VELVET SOUND architecture that has been widely adopted by well-established high-end audio companies. High signal to noise performance is achieved by improving VELVET SOUND technology by supporting a larger current drive capability. The performance of an audio DAC using switched capacitor is expanded to the limit with the AK4497. In addition, AKM has developed an original process that has greatly improved low noise performance and electric margin for audio devices, increasing data amount and enhancing original acoustic sound that can be found in the sound strength.

The AK4497 has been introduced in CES 2016 that is held from 6th Jan. at Las Vegas, NV, USA.
Samples are available from Feb. 2016 and mass production will be available from the summer 2016.

● Dynamic Sound Playback with Large Amount of Playback Information: VELVET SOUND architecture is improved
Not only circuit designing but also the LSI manufacturing process was newly developed at AKM exclusively for AKM?s audio devices.  The AK4497 is the first device to utilize this process in AKMs foundry. 32-bit processing is integrated for the IRD (Impulse Response Designed) Filter, reproducing a detailed and natural signal wave. A low-dispersion short delay filter was newly added to the other five filters found in our previous generation device. So, six different digital filter types are selectable according to the user audio and system preferences.

● AKM?s Best Performance D/A Converter
Low-distortion technology achieves industry?s best performance of -116dB THD+N DAC with 128dB S/N characteristic. The AK4497 has the best performance among AKM?s D/A converters. In addition, OSRD (Over Sampling Ratio Doubler) technology greatly reduces out of band noise.

● Supporting High Resolution Data
The first in the industry, a 22.4MHz DSD input is supported. The digital input supports up to 768 kHz PCM and 22.4 MHz DSD (Direct Stream Digital), recreating high-resolution sound that is as close as possible to the original acoustic source.

Features
AK4497EQ
VERITA AK4497EQ

Flagship Premium D/A Converter
DR, S/N 128dB (Mono mode: 131dB)
THD+N -116dB
Sampling Rate 8kHz to 768kHz
DSD Input 2.8MHz, 5.6MHz, 11.2MHz, 22.4MHz

Sound Color Six Types, 32-bit 8-fold Digital Filters
- Short Delay Sharp Roll-off, GD=6.25/fs
- Short Delay Slow Roll-off, GD=5.3/fs
- Sharp Roll-off
- Slow Roll-off
- Super Slow Roll-off
- Low-dispersion Short Delay
Resolution 32-bit
Number of Channel 2ch
VELVET SOUND Technology Low-distortion technology
OSRD (Over Sampling Ratio Doubler) technology
Power Consumption 346mW
Power Supply Analog: 4.75 to 5.25V
Digital: 1.7 to 3.6V
Operation Temperature -40 to 85?C
Package 64-pin TQFP (10mm x 10mm)

2gtWHcL.png


Kits:

There are many, but this is an example on eBay

http://www.ebay.com/itm/AK4497EQ-DAC-Dual-chip-Decode-support-DOP-DSD-384K-Led-Screen-Remote-Control-/252712162031?hash=item3ad6d192ef:g:EEQAAOSw2xRYb09S

wvf5Ljs.png


To me, this sounds like a promising development in the quest for more accurate digital reproduction
 
Top