Author Topic: 60mm and 95mm and 135mm high enclosures  (Read 477 times)

Offline tangmonster

  • Trade Count: (0)
  • AVForums Veteran
  • *****
  • Posts: 1,736
60mm and 95mm and 135mm high enclosures
« on: February 07, 2017, 03:53:15 PM »
In another thread here I asked if anyone is interested in open sided enclosures with heat sinks on the side:

https://www.avforums.co.za/index.php/topic,61021.msg753633.html#msg753633


In this thread i would like to get a feeling of how many people are interested in closed enclosures , you would need to put heatsink inside.
there is ventilation holes in the top and bottom , so you shouldn't have any issue with 100W per channel class AB amps not doing PA duty.

Personally I have a need for a 95mm and 60mm high enclosure and their faceplates.

So to get an idea if anyone is interested in purchasing herewith cost for enclosures.

All 3 options are are 420mm x 300mm inside diameter ,so the 1.6mm mild steel ads about 3-4mm all round with matt black powdercoating.

The faceplate are little bigger all round with 4mm overhang.

The 3 options for height is the inner diameter with lid on.

60mm enclosure:



base and lid:
including Fused IEC connectior: http://www.mantech.co.za/ProductInfo.aspx?Item=72M4186
including 4 of these feet with the m5 bolts and locknuts: http://www.fort777.co.za/index.php?main_page=product_info&cPath=715_716&products_id=4885
and bolts and locknuts to mount faceplate.

R750

60mm 5mm think alu faceplate , bare unfinished , lasercut:

R200

95mm enclosure:



base and lid:
including Fused IEC connectior: http://www.mantech.co.za/ProductInfo.aspx?Item=72M4186
including 4 of these feet with the m5 bolts and locknuts: http://www.fort777.co.za/index.php?main_page=product_info&cPath=715_716&products_id=4885
and bolts and locknuts to mount faceplate.

R800

95mm 5mm think alu faceplate , bare unfinished , lasercut:

R200


135mm enclosure:



base and lid:
including Fused IEC connectior: http://www.mantech.co.za/ProductInfo.aspx?Item=72M4186
including 4 of these feet with the m5 bolts and locknuts: http://www.fort777.co.za/index.php?main_page=product_info&cPath=715_716&products_id=4885
and bolts and locknuts to mount faceplate.

R900

135mm 5mm think alu faceplate , bare unfinished , lasercut:

R200





Offline tangmonster

  • Trade Count: (0)
  • AVForums Veteran
  • *****
  • Posts: 1,736
Re: 60mm and 95mm and 135mm high enclosures
« Reply #1 on: March 09, 2017, 08:23:47 AM »
I had very little response from people regarding these.

I needed myself ,so I got one or two extras manufactured . If anyone are interested I have 60mm and 95mm universal enclosures extra.

http://tangtechnologies.spaza.co/shop/category/1235/enclosure


Offline tangmonster

  • Trade Count: (0)
  • AVForums Veteran
  • *****
  • Posts: 1,736
Re: 60mm and 95mm and 135mm high enclosures
« Reply #2 on: May 19, 2017, 01:41:45 PM »
At long last I received my 4.5mm lasercut Anodised faceplates.

This makes the total stock I have currently

1 x 60mm enclosure with faceplate
1 x 135mm enclosure with faceplate
3 x 95mm enclosures with faceplates.

Here is an image of me busy building an amplifier into one of the 95mm enclosures:



and an image of the corner of one of the  anodised faceplates to give an idea of hoe they look with lid fitted: