- Joined
- Jul 10, 2010
- Messages
- 653
- Reaction score
- 28
Calling all informed bottleheads...
Based on specs below, which should be the most desirable amp? A or B
A B
1.Power output: 125 watts from 17 Hz to 32 KHz at less than 1% THD into 4 Ohms 125 watts from 30 Hz to 15 KHz at no more than 1.5 % THD into 4Oh
2.Triode Mode: 65 watts in triode mode. No
3.Frequency Resp: 10 Hz to 35 KHz +/- .1 dB at 1 watt 20 Hz to 20 kHz, +/- .25 dB at 10 watts
4.Power bandwidth: 17 Hz to 37 KHz +/- .3 dB at 125 watts N/A
5.Sensitivity: 1 volt in for 125 watts out 0.9v to rated power
6.Feedback: 10 db N/A
7.Damping Factor: 14 N/A
8.Input Impedance: 270,000 ohms 100,000 ohms
9.Hum & Noise: > 95 dB below 125 watt output 102 dB below rated power
10.Inver Phase : No N/A
11.Tubes: 4 X KT88, 6550, KT90, KT120 output tubes, 2 X 12BH7 1 x M8080, 1 x 6922, 4 x 6550
Are there any other major measures to consider?
:stop: Dont shoot me. (I know proof is in the listening, etc)
Based on specs below, which should be the most desirable amp? A or B
A B
1.Power output: 125 watts from 17 Hz to 32 KHz at less than 1% THD into 4 Ohms 125 watts from 30 Hz to 15 KHz at no more than 1.5 % THD into 4Oh
2.Triode Mode: 65 watts in triode mode. No
3.Frequency Resp: 10 Hz to 35 KHz +/- .1 dB at 1 watt 20 Hz to 20 kHz, +/- .25 dB at 10 watts
4.Power bandwidth: 17 Hz to 37 KHz +/- .3 dB at 125 watts N/A
5.Sensitivity: 1 volt in for 125 watts out 0.9v to rated power
6.Feedback: 10 db N/A
7.Damping Factor: 14 N/A
8.Input Impedance: 270,000 ohms 100,000 ohms
9.Hum & Noise: > 95 dB below 125 watt output 102 dB below rated power
10.Inver Phase : No N/A
11.Tubes: 4 X KT88, 6550, KT90, KT120 output tubes, 2 X 12BH7 1 x M8080, 1 x 6922, 4 x 6550
Are there any other major measures to consider?
:stop: Dont shoot me. (I know proof is in the listening, etc)