HDPVR - File flash erase process

AVForums

Help Support AVForums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Judy@Rtec

AVForums Grandmaster
*
Joined
Mar 25, 2012
Messages
3,533
Reaction score
172
Location
Alberton
The instructions below were received from multichoice (so blame them if it doesn't work;) )  to resolve problem re freezing and intermittent non responsiveness to remote (to the extent that it only respond like a minute later or that you physically  have to reboot every time you in playback mode) following their march/April 2011 software release -It has worked for us and others...

PS: you need TINY fingers and stable hands;)

"Flash File Erase Process (personalised settings will be lost)

Pace HD PVR 4 Tuner
1.      Reboot the decoder (from power cable or from front panel)
2.      Immediately PRESS AND HOLD the following keys simultaneously: STOP, EXIT, P+
3.      Keep them pressed for quite some time (30-60 seconds) until you see CLEARING FLASH scrolling on the front panel
4.      Press OK button and decoder will display PASS on the front panel
5.      The decoder will then reboot after a while, no further action is required

Pace HD PVR 2P
1.      Reboot the decoder (from power cable or from front panel)
2.      Immediately PRESS AND HOLD the following keys simultaneously: UHF, P+ and TV/AUD
3.      Keep them pressed for quite some time (30-60 seconds) until you see RESET scrolling on the front panel. Press PLAY to confirm
4.      Press OK button and the decoder will display PASS on the front panel
5.      The decoder will then reboot after a while, no further action is required

UEC HD PVR 4 Tuner
1.      Reboot  the decoder
2.      Press and hold REC and P+ together
3.      Wait until the decoder displays 3==3 on the front panel.
4.      The decoder will then go through a scan and tune to channel 100"
 
Top